beremiz

make attribute CFLAGS and LDFLAGS optional and add default empty value

2016-04-18, Andrey Skvortsov
69fe0b81e951
make attribute CFLAGS and LDFLAGS optional and add default empty value

Actually CFLAGS and LDFLAGS are not required and can be empty.
Without default empty value if target platform in project settings was
set to "Linux" CFLAGS and LDFLAGS was initialized with NoneType.
The result was broken build and it wasn't to save/load project with
such settings.

Traceback (most recent call last):
File "/home/developer/WorkData/PLC/beremiz/beremiz/ProjectController.py", line 956, in _Build
if not builder.build() :
File "/home/developer/WorkData/PLC/beremiz/beremiz/targets/toolchain_gcc.py", line 96, in build
Builder_CFLAGS = ' '.join(self.getBuilderCFLAGS())
TypeError: sequence item 0: expected string, NoneType found
IEC 61131-3
===========
IEC-61131 is a normative document provided by the standards organization IEC
(International Electrotechnical Commission) and describing a standard for
implementing programmable controllers.
The part 3 of this document (commonly named IEC 61131-3) specifies syntax and
semantics for programming language for programmable controllers. Beremiz
implements all the languages described in this document.
http://www.iec.eu
PLCopen TC6
===========
PLCopen is a vendor- and product-independent worldwide association defining
international standards for various topics related to control programming.
For this purpose, PLCopen has 6 technical committees.
The goal of the sixth committee (TC6) is to define a standard file format,
based on XML, for exchanging programmables controllers programmed using
IEC 61131-3 languages. Beremiz uses this file format for saving the PLC
programs of projects.
http://www.plcopen.org