beremiz

Tests: Enhance robustness of stdout driven waiting state in Sikuli based tests.
wxPython4
2022-03-05, Edouard Tisserant
ce366d67a5b7
Tests: Enhance robustness of stdout driven waiting state in Sikuli based tests.

Some tests were randomly passing, because from time to time waiting for idle was skiped. It was combination of multiple problems :
- buffering on stdout (now use readline + flush for each write to log)
- it is sometime required to wait for activity before waiting for timeout added "WaitForChangeAndIdle" to "stdoutIdleObserver"
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<PyFile>
<variables>
<variable name="WiiNunchuckStickX" type="INT"/>
<variable name="WiiNunchuckStickY" type="INT"/>
<variable name="WiiNunchuckAccX" type="INT"/>
<variable name="WiiNunchuckAccY" type="INT"/>
<variable name="WiiNunchuckAccZ" type="INT"/>
<variable name="WiiNunchuckButtons" type="WORD"/>
<variable name="WiiButtons" type="WORD"/>
</variables>
<globals>
<![CDATA[
import cwiid,commands,sys,re,os,time
wiimote = None
WIIMOTE_ADDR_MODEL = re.compile("((?:[0-9A-F]{2})(?::[0-9A-F]{2}){5})\s*Nintendo")
nunchuckzero = None
def Wiimote_cback(messages, time):
global nunchuckzero
state = dict(messages)
bts = state.get(cwiid.MESG_BTN, None)
if bts is not None:
PLCGlobals.WiiButtons = bts
nunchuck = state.get(cwiid.MESG_NUNCHUK, None)
if nunchuck is not None:
PLCGlobals.WiiNunchuckButtons = nunchuck['buttons']
X,Y = nunchuck['stick']
PLCGlobals.WiiNunchuckAccX = nunchuck['acc'][cwiid.X]
PLCGlobals.WiiNunchuckAccY = nunchuck['acc'][cwiid.Y]
PLCGlobals.WiiNunchuckAccZ = nunchuck['acc'][cwiid.Z]
if nunchuckzero is None:
nunchuckzero = X,Y
(PLCGlobals.WiiNunchuckStickX,
PLCGlobals.WiiNunchuckStickY) = X-nunchuckzero[0],Y-nunchuckzero[1]
def Connect_Wiimote(connected_callback):
global wiimote,nunchuckzero
mac_addr = ''
try:
mac_addr = file("wiimac.txt","rt").read()
except:
PLCObject.LogMessage("Wiimote MAC unknown, scanning bluetooth")
output = commands.getoutput("hcitool scan")
result = WIIMOTE_ADDR_MODEL.search(output)
if result is not None:
mac_addr = result.group(1)
PLCObject.LogMessage("Found Wiimote with MAC %s"%mac_addr)
file("wiimac.txt","wt").write(mac_addr)
# Connect to wiimote
if not mac_addr:
PLCObject.LogMessage("Connection to unknown Wiimote...")
wiimote = cwiid.Wiimote()
else:
PLCObject.LogMessage("Connection to Wiimote %s..."%mac_addr)
wiimote = cwiid.Wiimote(mac_addr)
if wiimote is not None:
nunchuckzero = None
wiimote.rpt_mode = cwiid.RPT_BTN | cwiid.RPT_EXT
# use the callback interface
wiimote.mesg_callback = Wiimote_cback
wiimote.enable(cwiid.FLAG_MESG_IFC)
connected_callback(mac_addr)
PLCObject.LogMessage("Wiimote %s Connected"%mac_addr)
else:
PLCObject.LogMessage("Wiimote %s not found"%mac_addr)
os.remove("wiimac.txt")
connected_callback(None)
def Disconnect_Wiimote():
global wiimote
if wiimote is not None:
wiimote.disable(cwiid.FLAG_MESG_IFC)
time.sleep(0.1)
wiimote.close()
wiimote = None
PLCObject.LogMessage("Wiimote disconnected")
]]>
</globals>
<init>
<![CDATA[
]]>
</init>
<cleanup>
<![CDATA[
Disconnect_Wiimote()
]]>
</cleanup>
<start>
<![CDATA[
]]>
</start>
<stop>
<![CDATA[
]]>
</stop>
</PyFile>