Added functions getByte() and setByte() that are used to get/set data from/to buffer.

2016-11-03, bmakuc

Added RTC block.

2016-10-27, dporopat

Edit zip function to use compression algorithm.

2016-10-21, agregorcic

Changed name of wizard to UriOptions dialog.

2016-10-13, Denis Poropat

Added support for short uart Smarteh buffer (26bytes, 19200kbps). Buffer length and baudrate are initialised from Composer. Added control of CAN1 & CAN2 enable pin: When PLC app is started both drivers are enabled and then disabled when PLC app is stopped.

2016-10-10, bmakuc

SetTitle added in LPC Maneger for further use.

2016-09-21, dporopat

Changed name of Beremiz to Beremiz Manager for Smarteh version of Beremiz.

2016-09-20, dporopat

Disable resettimer of refreshing tree.

2016-09-19, dporopat

Edit bug. Create xeye zip file only if build is successfuly created.

2016-08-22, agregorcic

Replaced LPCConnector with _connector.

2016-08-05, dgaberscek

Added double click function to URI_location. Added ToZIPFile function.

2016-08-05, dgaberscek

Adding back new LPCManager.py.

2016-07-19, dporopat

Back to old LPCmanager, because of error on start / stop PLC program with CAN connection.

2016-07-18, dporopat

Removed if statement.

2016-07-18, dporopat

LPCManager for arch is MU9 and GOT use correct libraries.

2016-07-15, dporopat

Merge

2016-07-15, agregorcic

Closed branch GOT
GOT
2016-07-15, agregorcic

If arch statement added.

2016-07-13, dporopat

Changed to look like py_ext.

2016-07-13, dporopat

Added new an old pous to Pous folder.

2016-07-12, dporopat

merge

2016-07-12, dporopat

Modified LPCManager.py to merge with GOT branch.

2016-07-12, dporopat

Smarteh uart bus: added support for short buffer (26B) and 19200 baudrate.

2016-06-14, bmakuc

Added RUN LED control.

2016-06-07, bmakuc

Modbus RTU: initialised default state of baudrate and parity.

2016-05-26, bmakuc

Increased num of modbus regs from 511 to 512 and removed init of modbus baud-rate and parity which is now done from Composer.

2016-05-13, bmakuc

Modbus scan rate accuracy improved: timer is incremented according to current-old time delta. Current time is acquired with rt_timer_read().

2016-05-05, bmakuc

Modbus: added support for parity (odd/even/none).

2016-04-18, bmakuc

Modbus RTU: added support for different baud rates - set in Smarteh IDE.

2016-04-14, bmakuc

Uart communication update: controler cycles through devicecs without skiping them. It always waits for the timer to expire.

2016-03-11, bmakuc

Added UART devices communication status.

2016-01-27, bmakuc

Edit bug in LPCManager.
GOT
2016-01-26, agregorcic

Edit bug in LPCManager.
GOT
2016-01-26, agregorcic

Disabling SVGUI by name. Refs #1868.
GOT
2016-01-18, Denis Poropat

Disabling SVGUI. Refs #1868.
GOT
2016-01-12, agregorcic

Disabling SVGUI. Refs #1868.
GOT
2016-01-12, agregorcic

Create new branche for GOT.
GOT
2016-01-11, agregorcic

Enabled BASE_PARAMS.

2015-12-04, Edouard Tisserant

Fixed CanFestival plugin and added -Wno-unused-function to remove warnings when compiling PLC application.

2015-11-20, Edouard Tisserant

Enabled Python extension node in Project tab.

2015-11-16, Edouard Tisserant

Added support for remote updating DTB, kernel and rootfs images.

2015-07-30, Edouard Tisserant

enabled canopen plugin for non MC8

2015-06-19, Edouard Tisserant

Finished RTU Master support

2015-06-19, Edouard Tisserant

fixed build warnings in SPI_init

2015-06-15, Edouard Tisserant

Fixed init of SPI for retain

2015-03-14, Edouard Tisserant

Retain buffer implemntation for spi/rtdm

2015-03-14, Edouard Tisserant

Fixed build for MC9, disabled RTU

2015-03-13, Edouard Tisserant

Fixed wxversion, added own XSD for MC9 target

2015-03-13, Edouard Tisserant

Added retain init cleanup stubs

2015-03-13, Edouard Tisserant

Added MC9target

2015-03-13, Edouard Tisserant

Work on RTU support, some cleanup in surrounding C code

2015-03-12, Edouard Tisserant

Align with definition of tick from beremiz rev e14003eb4d42

2015-02-10, Edouard Tisserant

Fixed updating device buffers when PLC app cycle is faster than some device updates.

2015-02-05, Edouard Tisserant

Moved RS485 chip enable signal from RTS to CTS pin.

2015-01-30, Tomaz Orac

Added per LPCBus type LDFLAGS, specially for Modbut RTU, links with libary generated in libmbrtu buildroot package

2015-01-23, Edouard Tisserant

Splitted C code contained in LPCBus.py into multiple C files in LPCBus directory

2015-01-22, Edouard Tisserant

Finished UART device communication. Fixed missing least significant byte in 16-bit int ("analog values"). Changed communication with MUs so that only one is called each time UART task is unblocked.

2015-01-09, Tomaz Orac

Fixed RightBus and RS485 timers erratic behaviour when PLC tick time == polling time

2014-12-12, Edouard Tisserant

Added init code for new RS485 modules with 48 bytes

2014-12-11, Edouard Tisserant

Replaced RS485 RTS with GPIO. Added delay after transmit's write to cope with non blocking write, read received buffer in a loop until completion or timeout. NOTE : non realtime behavior of Linux UART driver may lead to write error since write may not finish befor receive mode is set again.

2014-12-11, Edouard Tisserant