Closed branch GOT
GOT
2016-07-15, agregorcic

If arch statement added.

2016-07-13, dporopat

Changed to look like py_ext.

2016-07-13, dporopat

Added new an old pous to Pous folder.

2016-07-12, dporopat

merge

2016-07-12, dporopat

Modified LPCManager.py to merge with GOT branch.

2016-07-12, dporopat

Smarteh uart bus: added support for short buffer (26B) and 19200 baudrate.

2016-06-14, bmakuc

Added RUN LED control.

2016-06-07, bmakuc

Modbus RTU: initialised default state of baudrate and parity.

2016-05-26, bmakuc

Increased num of modbus regs from 511 to 512 and removed init of modbus baud-rate and parity which is now done from Composer.

2016-05-13, bmakuc

Modbus scan rate accuracy improved: timer is incremented according to current-old time delta. Current time is acquired with rt_timer_read().

2016-05-05, bmakuc

Modbus: added support for parity (odd/even/none).

2016-04-18, bmakuc

Modbus RTU: added support for different baud rates - set in Smarteh IDE.

2016-04-14, bmakuc

Uart communication update: controler cycles through devicecs without skiping them. It always waits for the timer to expire.

2016-03-11, bmakuc

Added UART devices communication status.

2016-01-27, bmakuc

Edit bug in LPCManager.
GOT
2016-01-26, agregorcic

Edit bug in LPCManager.
GOT
2016-01-26, agregorcic

Disabling SVGUI by name. Refs #1868.
GOT
2016-01-18, Denis Poropat

Disabling SVGUI. Refs #1868.
GOT
2016-01-12, agregorcic

Disabling SVGUI. Refs #1868.
GOT
2016-01-12, agregorcic

Create new branche for GOT.
GOT
2016-01-11, agregorcic

Enabled BASE_PARAMS.

2015-12-04, Edouard Tisserant

Fixed CanFestival plugin and added -Wno-unused-function to remove warnings when compiling PLC application.

2015-11-20, Edouard Tisserant

Enabled Python extension node in Project tab.

2015-11-16, Edouard Tisserant

Added support for remote updating DTB, kernel and rootfs images.

2015-07-30, Edouard Tisserant

enabled canopen plugin for non MC8

2015-06-19, Edouard Tisserant

Finished RTU Master support

2015-06-19, Edouard Tisserant

fixed build warnings in SPI_init

2015-06-15, Edouard Tisserant

Fixed init of SPI for retain

2015-03-14, Edouard Tisserant

Retain buffer implemntation for spi/rtdm

2015-03-14, Edouard Tisserant

Fixed build for MC9, disabled RTU

2015-03-13, Edouard Tisserant

Fixed wxversion, added own XSD for MC9 target

2015-03-13, Edouard Tisserant

Added retain init cleanup stubs

2015-03-13, Edouard Tisserant

Added MC9target

2015-03-13, Edouard Tisserant

Work on RTU support, some cleanup in surrounding C code

2015-03-12, Edouard Tisserant

Align with definition of tick from beremiz rev e14003eb4d42

2015-02-10, Edouard Tisserant

Fixed updating device buffers when PLC app cycle is faster than some device updates.

2015-02-05, Edouard Tisserant

Moved RS485 chip enable signal from RTS to CTS pin.

2015-01-30, Tomaz Orac

Added per LPCBus type LDFLAGS, specially for Modbut RTU, links with libary generated in libmbrtu buildroot package

2015-01-23, Edouard Tisserant

Splitted C code contained in LPCBus.py into multiple C files in LPCBus directory

2015-01-22, Edouard Tisserant

Finished UART device communication. Fixed missing least significant byte in 16-bit int ("analog values"). Changed communication with MUs so that only one is called each time UART task is unblocked.

2015-01-09, Tomaz Orac

Fixed RightBus and RS485 timers erratic behaviour when PLC tick time == polling time

2014-12-12, Edouard Tisserant

Added init code for new RS485 modules with 48 bytes

2014-12-11, Edouard Tisserant

Replaced RS485 RTS with GPIO. Added delay after transmit's write to cope with non blocking write, read received buffer in a loop until completion or timeout. NOTE : non realtime behavior of Linux UART driver may lead to write error since write may not finish befor receive mode is set again.

2014-12-11, Edouard Tisserant

Enhanced code generation of MC9 busses, allowing nesting code given by LPCcomponsed. Added RS485 bus scanning logic and serial communication. Added (non working) control of RS485 transceiver through RTS

2014-12-10, Edouard Tisserant

Implemented double-buffering C code for RS485 bus

2014-12-09, Edouard Tisserant

Build (nop) with RS485 'Devices'

2014-12-08, Edouard Tisserant

Fixed previous commit side effects

2014-12-08, Edouard Tisserant

Ripped LPCBus class appart from LPCManager.py

2014-12-08, Edouard Tisserant

Added Right Bus Xenomai driver support through RTDM IOCTLs. Othe minor fixes for MC9 build

2014-11-21, Edouard Tisserant

MC9 : Added Buttons, re-enabled PLC configuration tabs disabled for MC8, added some right bus declarations in LPCBus, disabled SetOnline Mode command.

2014-11-21, Edouard Tisserant

Added -Wno-unused-function, to matiec generated C files CFLAGS, removed additional 'add resource' in project tree right click menu

2014-03-26, Edouard Tisserant

Align initial ressource loading (bitmaps, locales) with recent changes in Beremiz

2014-02-27, Edouard Tisserant

Fixed bug when starting simulation. In some case PLC status was asked before local runtime was connected.

2013-10-03, Laurent Bessard

Fixed bug when compiling project for LPC

2013-09-27, Laurent Bessard

Fixed bug when starting LPCManager

2013-09-27, Laurent Bessard

Fixed bug when compiling project which path contains non-ASCII characters

2013-09-25, Laurent Bessard

Fixed LPCManager according to newer version of Beremiz

2013-09-25, Laurent Bessard

Fixed bug when opening project with path containing non-ascii characters

2013-07-03, Laurent Bessard

Fixed bug in simulation with debugging variables

2013-05-15, Laurent Bessard